Arrakis Systems MARC-15 Manual download pdf (Page 18)

O P E R A T I N G I N S TR U C TI O N S

A/B INPUT SELECTOR

The module can select between two microphones. The ‘A’ input is activated

when the button is NOT lit. The ‘B’ input is active when the module is lit.

CHANNEL ON AND OFF

To turn a channel on, simply push the green ON switch at the bottom of the

fader. When the channel is on, the switch will be lighted. To turn the chan-

nel off, simply push the yellow OFF button.

CHANNEL ON AND OFF LOGIC

The mic channel has support for a control turret. The logic controls: chan-

nel on, channel off, LED tally of channel on-off, cough, and talkback to con-

sole cue system.

OUTPUT BUS ASSIGNMENT

The green PGM and AUD and UTL buttons above the slide fader assign the

channel to any (or all) of the main audio mixing buses: Program & Audition

& Utility. Push the button once to light the button and assign it to the bus.

Push the lighted button again to unassign the channel from the bus.

CUE

The cue button is a status lamp indicating whether cue has been activated

by turret logic from a remote studio. When lighted, the mic in the remote

studio has been placed into the cue system for talkback from that mic.

Note: this cue switch does NOT activate cue in the control room because

this would cause feedback between the cue speaker and the mic.

MUTE

When the channel is turned on, the monitor and cue speakers are muted

to stop feedback between those speakers and the microphone. Muting

occurs on both the ‘A’ and ‘B’ inputs.

Mono mic level Input Modules

Program Bus

Assignment

Channel

On & Off

switches

Audition Bus

Assignment

Cue Bus

Assignment

Tally light

Slide fader

Level control

3.2

Aud

Utl

Cue

A/B

Pgm

Mic

A / B Input

selector

Utility Bus

Assignment

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 81 82

Comments to this Manuals

No comments

Arrakis Systems MARC-15 Manual Page 18

Comments to this Manuals