Arrakis Systems X-mixer-14-22 Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
B L U E T O O T H
7.1
Congratulations on your purchase of an ARC
series console. One possible feature with your
console is the Bluetooth channel. This section of
the manual will assist with the operation of the
Bluetooth feature.
Bluetooth is an optional feature for the ARC
series consoles (ARC-8, ARC-10 series & ARC-15).
The Part number in the order will specify ‘blue’ at
the end, if you have purchased a Bluetooth ver-
sion. For example, the ARC-10BP-blue has
Bluetooth, but the ARC-10BP does not.
On your ARC-8 console, you will notice your
Bluetooth controls on the right side above the
Headphone volume control. The antenna is located
on the right side of the board, and there are 2
buttons with specific tasks.
Bluetooth audio will play out the Bluetooth channel (CH 7 for ARC-8, CH 10 for ARC-10, CH 15 for ARC-15). This is the phone hybrid channel, and
may alternatively be used with your phone hybrid. The phone and Bluetooth audio sums into this channel.
OPERATIONAL INSTRUCTIONS
HOW TO PAIR
To connect your cell phone, tablet, or Bluetooth device to the console:
1. Power up your ARC console. If already powered on, then leave the console on.
2. Press and hold the blue Call button for exactly 5 seconds, and then release. You will hear a beep on the Bluetooth channel.
3. You will notice the red Drop LED will now blink on your console. This means it is ready to connect. In your cell phone, tablet, or other device,
turn on the Bluetooth option. You will have 10 minutes to pair. After the 10 minutes, it will still flash, but you will need to start back at step 1 to
pair.
4. In your device settings, select Search for devices. This step is different depending on the device you are connecting.
5. Your device should find ARRAKIS 1.X (X = the firmware version). Select to connect.
6. Now that your device is paired, the red Drop LED should now be constant lit.
7. After your device is paired, you will only need to reconnect within your device. It is as simple as finding the Bluetooth device and select the
option to Connect.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments