Arrakis Systems X-mixer-14-22 Manual download pdf (Page 21)

Push to Talk to the Caller

Push the CUE button to listen

to the caller off line.

Turn the channel on to place the caller onto the console Pro-

gram bus for on-air or production.

O P E R A T I N G I N S T R U C TI O N S

The Telephone Input Channel (channel 7)

The ARC-8 supports a single phone caller for Live On Air or Off-line (contest caller, etc.) applications on channel 7 of the console.

CHANNEL ON AND OFF

To turn a channel on, simply push the red ON switch at the bottom of the fader. When the channel is on, an LED indicator above the

switch will be lighted. To turn the channel off, simply push the red ON button again.

CHANNEL ON AND OFF LOGIC

(Hybrid control)

The ARC-8 does not have external control of the hybrid. The hybrid must be activated manually from the front panel of the hybrid.

HYBRID AUDIO FEED

The output to the phone hybrid will be a mix of channels 1-6 and channel 8. The output to the phone hybrid will NOT include the channel

seven phone callers voice so that there will NOT be feedback.

TALKING TO THE CALLER

(off line)

Push the ‘TALK’ button on the channel one mic to feed the control room mic to the caller. When the button is down, the program audio

fed to the caller is muted and only the control room mic audio is heard by the caller. The caller will be heard in the monitor and ear-

phone systems (Program audio dimmed below the caller’s voice).

3.4

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

No comments

Arrakis Systems X-mixer-14-22 Manual Page 21