Arrakis Systems X-mixer-14-22 Manual download pdf (Page 24)

O P E R A T I N G I N S T R U C TI O N S

The Cue system

The cue system is designed for monitoring an audio source without placing it on air. This feature is useful for listening to a network

feed before bringing it to air, listening to a CD to be certain it is the correct song, etc. The cue system features ‘Auto-cue,’ where

cue is heard in the Monitor speakers and separate Cue speakers are not required.

ACTIVATING CUE

To activate cue, click on the CUE button on an input source channel. To exit the cue mode, click on the CUE button again. The cue signal

is PRE-fader and therefore the fader level and the channel ON-OFF status has no effect on the cue signal.

CUE AUDIO

Cue audio will be heard in the Monitor speakers and the Headphones. In the Monitor and Headphone system, Autocue will dim the Pro-

gram in the headphones and play the cue audio over top of program audio.

3.7

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

No comments

Arrakis Systems X-mixer-14-22 Manual Page 24