Arrakis Systems X-mixer-14-22 Operations Instructions Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
Arrakis Systems, inc. --- 6604 Powell st., Loveland, CO 80538 --- 970-461-0730 --- www.arrakis-systems.com
OPERATING INSTRUCTIONS
BASIC OPERATION - 5 channel 1200 console
2-1)
2.1
EXT1
EXT2
PGM
MONO
MIX (-)
OFF
MONITOR
EARPHONE
TALKBACK
CUECUECUECUECUE
PROGRAM
LEFT
Channel
ON-OFF
switch
Channel
Level fader
with fader
cue detent
switch
Unassigned
momentary
switches
Earphone
Volume
Control
Monitor
Volume
Control
Monitor
Input
Select
switch
Unassigned
Talkback
switch
Unwired
remote select
switch
1
2
3
4
5
OFF
REMOTE
PROGRAM
RIGHT
1) Input Channels
This is a five channel console with a single input per channel. Channels can be
selected as mono mic or stereo line level when factory ordered.
Each slide fader on line level channels
has a cue detent switch at the bottom of travel to activate the mono mix cue system. The illuminated
channel ON-OFF switches are push once for ON and push again for OFF. The push button switches
above channels 1-3 are
unwired and may be customer assigned to a variety of custom switch or tally
functions.
2) Remote Select Switch
This six position interlocked switch is 4PDT and may therefore switch stereo
balanced audio signals. The switch comes unwired from the
factory for maximum flexibility.
3) Earphone System
The earphone input follows the monitor select switch. A volume control is provided.
The earphone will 'Autocue' (dim the program audio
and play mono cue over the right earphone speaker)
when a channel is placed into cue. External Talkback will also appear in the right
speaker over the
dimmed program audio.
4) Monitor
Tthe monitor system may select any one of five inputs: 1) External Input 1, 2) External Input
2, 3) Program, 4) Mono mix of Program, or 5) the
Mix Minus output. The monitor system also will
'Autocue' (dim the program audio and play mono cue over the right monitor speaker) when
a channel is
placed into cue. External Talkback will also appear in the right speaker over the dimmed program audio.
The unassigned
'Talkback' switch may be user wired to switch mic audio to feed talkback to another
studio.
5) VU Meters
The meters will follow the Monitor input select switch so that you may meter the off air
signal as well as the other buses.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Comments to this Manuals

No comments